2013 Dodge Avenger Check Engine Light

Will the check engine light reset itself?

The check engine light on your 2013 Dodge Avenger will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For instance, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will quickly turn itself off. Likewise, if your catalytic converter is working correctly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Dodge Avenger light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Larry H. Miller Dodge RAM Avondale so the light and code can be double-checked and reset.

Is it safe to drive your 2013 Dodge Avenger with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. If the check engine light is flashing, this means that there is a serious issue and it is suggested to service your Dodge Avenger quickly. Call the experts at Larry H. Miller Dodge RAM Avondale by dialing 4802072126 so you can describe the issues. Or lessen your speed and bring your 2013 Dodge to our certified mechanics as soon as imaginable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis. The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The good news, Larry H. Miller Dodge RAM Avondale offers entirely free multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

2013 Dodge Avenger Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several common causes including something as simple as a loose gas cap. Other generally common reasons for a Check Engine Light are faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, damaged head gasket, or broken spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Dodge Certified Mechanics and the certified service protocol to isolate the root problem and completely repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Dodge issue was totally fixed.

Every 2013 Dodge Avenger was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its essential systems. The quick sensors are continually detecting conditions while sending important data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, sadly that is the limitation of the Check Engine Light – it won’t tell you what explicitly is wrong nor what to do about it. That’s where we come in; Larry H. Miller Dodge RAM Avondale provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

2013 Dodge Avenger Check Engine Light

If the check engine light in your 2013 Dodge Avenger starts flashing, that means that the problem needs attention expeditiously and your Dodge should be brought in instantly. A flashing light signifies that the problem is tremendously serious and if not taken care of expeditiously may result in major and serious damage to the car. This blinking light usually reveals a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an costly and extensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A broken, old or dirty spark plug can cause the engine to misfire. If the problem is completely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a remarkably expensive repair. If your check engine light is always flashing, please contact our team of automotive experts at Larry H. Miller Dodge RAM Avondale instantly by calling 4802072126.

What could cause the check engine light to come on in a 2013 Dodge Avenger?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could likewise be a warning of a serious problem that could cause serious damage to your engine and come with a hefty and expensive repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow ordinarily means something less serious but a flashing check engine light reveals that your vehicle’s engine is in meaningful trouble and useful service is required instantly. If your check engine light is flashing in your 2013 Dodge Avenger, we exceedingly recommend not to drive the car and schedule Dodge service today. Below is a list of the most common reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more instantly and your car will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A broken sensor can not only affect your miles per gallon, but it can cause serious damage to your catalytic converter and your 2013 Dodge Avenger's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the precisely correct mixture of air and fuel that enters the cylinders in your engine. A broken O2 sensor can also cause a vehicle to fail an emissions test.
• One of the most common and frequent cause is that your 2013 Dodge Avenger gas cap is loose, broken or missing. The gas cap for your 2013 Dodge Avenger serves multiple purposes. It prevents perilous gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a broken fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more costly. Luckily, to replace a gas cap isn't costly. If your check engine light turns on quickly after you put gas in your 2013 Dodge Avenger, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Dodge Avenger is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Dodge Avenger is having trouble starting, idling rough or has a sudden rapid change in the position of the throttle pedal, this could be a vital sign of a broken mass airflow sensor.
• New Spark Plugs or Plug Wires are needed for your 2013 Dodge Avenger. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience a evident poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more costly repairs.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2013 Dodge Avenger if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the car from starting. If these issues sound familiar, bring your Avenger to Dodge and have our team of talented certified mechanics make sure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or utilizing OEM parts first place might cost a little bit more but could help you save substantially from having to get poor work and damage caused by poor installation work corrected.
• Your 2013 Dodge Avenger has a vacuum leak. Every Dodge Avenger has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Dodge Avenger’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A broken catalytic converter is ordinarily caused by invariably neglected maintenance, which is why Larry H. Miller Dodge RAM Avondale offers a free multi-point check with every Dodge service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Dodge Avenger will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other perilous problems from overheating.
• The battery is low or dead. The battery in your 2013 Dodge Avenger is every vital. Without a vehicle battery, your vehicle won’t start, light up the road in front, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Dodge you drive, but check our current service coupons and specials.

Check Engine Light Service 2013 Dodge Avenger

What do you do when you’re driving along in your Dodge Avenger and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Dodge owners, your heart sinks extremely because you may have precisely idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, calm breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is advised that you get your 2013 Dodge Avenger checked instantly. Ignoring that warning could end up causing major, major damage to expensive engine parts.

When your 2013 Dodge Avenger's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is usually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can immediately identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Dodge auto repair mechanics at Larry H. Miller Dodge RAM Avondale. There are again a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the definitely correct issue and repair it.

2013 Dodge Avenger Check Engine Light Codes

The check engine light turning on can be quite intimidating, exceptionally to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, likewise known as the OBD (on-board computer diagnostic system) in your Avenger. There are hundreds of different codes that your check engine light can properly represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you helpful knowledge about your car and will likewise allow that critical Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, evident and useful car symptoms do not consistently accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are likewise hundreds of conceivable reasons for the light, including:

• Bad Spark Plugs
• Transmission issues
• Ignition system faults
• Loose Gas Cap or Missing Gas Cap
• Fuel and air metering systems problems
• Computer output circuit issues
• Emissions controls issues
• Old Battery
• O2 Sensor

This is why it is vital for someone who does not have a lot of prevalent automotive knowledge to not assume what a code means. Call Larry H. Miller Dodge RAM Avondale at 4802072126 today or schedule your check engine light service online today! If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a talented certified Dodge mechanic.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2013 Dodge Avenger is the check engine light. The check engine light is part of the vital onboard diagnostics system, and displays in a variety of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Dodge Avenger. Some of these essential duties include ignition timing, shifting automatic transmissions controlling engine speed, and implementing security control, just to name a few. With that being said, the check engine light can mean a wide range of different things. It can be as simple as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2013 Dodge Avenger, contact Larry H. Miller Dodge RAM Avondale. Contact Larry H. Miller Dodge RAM Avondale today! Our Dodge service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we endorse that you pull over and contact Larry H. Miller Dodge RAM Avondale to help determine if your car is secure to drive in or if we endorse a tow truck. Since each check engine code has its own level of severity, it is usually difficult to predict how many miles you can be secure in driving with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.